Personal pages/Gin making

From Perswiki
< Personal pages
Revision as of 10:25, 28 October 2020 by Per Jessen (Talk | contribs) (Attempt#2)

Jump to: navigation, search

Gin making

August 2019. With the yield from the apples being pretty poor, and having gathered some 25litres of 30-40% stuff, I decided to have a go at turning it into gin.

Recipe#1

200g of juniper, 100g of koriander. 10litres. The "botanicals" are in a piece of tea towel, old and quite thin, inside one of those for steaming vegetables, then inside pot#2, just over the output. The 300g seems like quite a bit, it's full. I'm wondering if it can be reused? seems like it should be reasonable. I'm not using the siebboden, nothing that could burn and I started the Bartscher at 10. I primed the thumper with the same stuff. I'm not expecting pot#2 to gather much liquid, it ought to quickly turn into vapour, but I can always empty it if I feel like it.

With the Bartscher at 10, pot#1 warms up to 80 in bout 20mins, after which the thumper hits 80 in about 5min. There is so much vapour that the drops form a small stream, I have to wonder if any vapour escapes out of the condenser? Makes me think about adding the other one, maybe buying the smaller one from the Brocki. After the first warm up, I reduced the Bartscher to 5.

The first few 50ml glasses did seem to smell of acetone, which surprises me. There should not be any methylalcohol. I took 6 x 50ml, then started with the bigger collectors. The first 250ml was 84°

After emptying pot#1, I processed the remaining 10-12liters, using the same gin basket contents. I figured the juniper berries and the koriander would be good for another round. All in all, I produced about 5litres of about 80°. I'm letting it wait for a couple of weeks before diluting and filling bottles. Aiming for 40%, it will be 14-15 x 700ml.

Result - disappointing. Too little taste/aroma, still the unpleasant smell/taste of the tails.

Attempt#2

June 2020. I have been collecting tails of course, two 25litre bottles. Have just today (May 31 2020) started filling up a third. I have added approx 200g of Junpier berries to one bottle, first soaked them in methylalcohol for a couple of weeks. 200g for 25litres does not seem like very much, I am now thinking I should add some more and some koriander too. The lenghty soaking might also make a difference.

  • Bottle#1 - 200g juniper, methylalcohol soaked.
  • Bottle#2 - 200g juniper, 100g koriander
  • Bottle#3 - 200g juniper, 100g anisseed (from Coop 50% stock).

2020/09/05 Have distilled bottle#1, after having stewed for four months. The juniper berries all sank to the bottom. I added 10litres of water (approx). Yield was 4 litres at a total of 70 (to be determined), plus 400ml at 60 - the latter did not have a particularly strong juniper flavour. About 2litres of <30% to go back into bottle#3.

2020/10/25 Have distilled bottle#2, having stewed since June, so also about four months. I added 6-7-8 litres of water. Yield about 2.8 litres at 80%, then output dropped straight back to 30. Maybe one litre for bottle#3. This was my first run with the nex reflux cooler - I wonder if this nice high volume output and the steep drop is due to that.